These are some of the products I use most often on my gourds. I use what I sell!
Glues and Adhesives
Insta-Cure+
Cyanoacrylate (Super Glue)
The best gap-filling super glue for inlaying heishi and stones, and has many other uses! Lots of uses. Fast setting (5-15 seconds) and thick enough to stay where you put it. Comes with a fine applicator tip and instructions.
$4 for a 1/2 oz. bottle - Larger 1 oz size $6
Insta-Set Glue Accelerator
Just spray a bit of this fast acting catalyst on your project and the glue will set immediately! $6 for a 2 oz. bottle
Un-Cure Glue Debonder
This solvent will loosen and dissolve dried cyanoacrylate glues (it will work on all brands) Great for when you glue your fingers together! $4 for a 1 oz. bottle
Extra screw on tips
in case the tip gets clogged
or damaged. $.75 each
*Looking for Mini Saws and Transformers?
To make each page load faster, these items have all been moved to their own page: Mini Tools
*Looking for Carving Burs and Rotary Tool Accessories?
To make each page load faster, these items have all been moved to their own pages: Carving Burs or Rotary Tool Accessories
Rolls of 5mm (approximately 1/4") masking tape. Perfect for laying out designs and masking small areas!
$1.50 per roll
1/2 oz. Size - $4
1 oz size - $6
PC Lumber
Similar to Apoxie Sculpt or Quikwood, PC lumber is a two part epoxy clay that can be used for sculpting or repairs. Slice off the amount you need, squeeze and knead to mix, and you have about 15 minutes of working time. Super strong bond for repairing broken parts or adding handles or sculpting. Natural wood/gourd color.
$12 for 2 oz. tube
*Looking for Files, Sandpaper and other small hand tools?
To make each page load faster, these items have all been moved to their own page: Tools
We are an authorized distributor for
Ram and Micro-pro micromotor carvers and Burnmaster woodburning systems.
Please use the link buttons to view micromotor tools and woodburning tools.
Plastic applicator bottle with 10 assorted sizes of tips. Great for glues, dyes, and other liquids where you want to place a precise amount. Use to draw on fine line designs with inks and dyes. Keep a few on hand for color changes or keep one separate for glue.
$2.50 per set
Accelerator - 2 oz.- $6
Debonder - 1 oz. - $4
You can now pay with or without a PayPal account.
QuikWood Epoxy Putty
$10.95
QuikWood Epoxy Putty
Similar to Apoxie Sculpt or PC lumber, QuikWood is a two part epoxy clay that can be used for sculpting or repairs. Slice off the amount you need, squeeze and knead to mix, and you have about 15 minutes of working time. Super strong bond for repairing broken parts or adding handles or sculpting. Natural wood/gourd color.
$10.95 for 2 oz. tube
Home.html
Starbond Super Glue
Super Fast Thin
2 oz.
$11.50
Starbond Super Glue
Medium
2 oz.
$11.50
Starbond Super Glue
Medium-Thick
2 oz.
$11.50
Starbond Super Glue
Accelerant
2 oz. Spray Bottle
$8.50
Starbond Super Glue
White Medium-Thick
.5oz.
$14.00
Starbond Super Glue
Brown Medium
2 oz.
$15.50
Starbond Super Glue
Black Medium
2 oz.
$15.50
Starbond Micro Tips
50/pack
$14.00
There are lots of ways to do inlays. Super Glue (Cyanoacrylate) is one way. 2 part Epoxy, Resin and UV Resin are other ways. Its a matter of how you like to work. I like UV Resin because there's no mixing involved and it cures quickly with Ultra Violet light - sun or a UV lamp. My favorite UV Resin is available at JDiction. This link opens to their website. I do earn a commission from sales referrals from Arizona Gourds. Use my coupon code at check out for 10% off: ARIZONAGOURDS
There are lots of ways to do inlays. Super Glue (Cyanoacrylate) is one way. 2 part Epoxy, Resin and UV Resin are other ways. Its a matter of how you like to work. I like UV Resin because there's no mixing involved and it cures quickly with Ultra Violet light - sun or a UV lamp. My favorite UV Resin is available at JDiction. This link opens to their website. I do earn a commission from sales referrals from Arizona Gourds. Use my coupon code at check out for 10% off: ARIZONAGOURDS
All Products ship free in the U.S.
There are lots of ways to do inlays. Super Glue (Cyanoacrylate) is one way. 2 part Epoxy, Resin and UV Resin are other ways. Its a matter of how you like to work. I like UV Resin because there's no mixing involved and it cures quickly with Ultra Violet light - sun or a UV lamp. My favorite UV Resin is available at JDiction. This link opens to their website. I do earn a commission from sales referrals from Arizona Gourds. Use my coupon code at check out for 10% off: ARIZONAGOURDS
UV Resin and Epoxy Resin
🔥【SUPER CRYSTAL CLEAR & LOWEST ODOR AND SAFE】JDiction UV Resin cooperates with the largest supplier in Southeast Asia. We only produce the purest resin, you can get the most crystal clear and gloss crafts. At the same time, we adopt the safest way to develop and produce to create a healthier and lowest odor resin, no pollution to the environment, allowing you to complete the craft work more comfortably.
Self-Sealing CA Glue Tips
55 Tips/bag
$3.75
1 oz size is Out of Stock
1/2 oz size is Out of Stock
Starbond Debonder
2 oz.
$10.50
